How to manage a vps - Page 2 - GoFuckYourself.com

porn-update · 08-08-2017, 08:51 AM

Honestly to me the https make just crap, I find them an extremely stupid thing, especially on sites like these, but slowly everyone is getting scared by big G.

At the logical level on many occasions have no meaning, eg in cases like mine where the site is HTTPS but the contents are not.

I think it's just an advantage for big G that certainly somehow manages to simplify or reduce the weight of the pages that he has to read.

The fact that they should be used only in login procedures or containing sensitive data has been completely suppressed by the fear of not complying with the rule of big G, so many sites apply them on all pages.

At the moment they almost seem to be the main factor even just to be taken into account by big G, also I do not think it is absolutely true.

With regard to end users I believe that 99% have absolutely no idea what the HTTPS protocol is, nor do they care about it.

My sites would not absolutely need it, I'm installing them only in some, just not to be the only idiot not to have them, but I would gladly do it less.

porn-update · 08-08-2017, 08:59 AM

Another stupid question...

Cloudflare needs something on the server to work?

I use it only in a bigboobshardpics.com site and only in the Cdn folder, where all the images of the site are located.

The site itself does not need cloudflare, slows down if I apply it to the whole site.

The idea is to create a kind of CDN leveraging CloudFlare, just for images.

Does it make sense to you?
Need something on the server for CloudFlare?

porn-update · 08-08-2017, 02:05 PM

And so, I've seen everything, tried everything, done everything...

The 2 sites are online:
https://www.alternativegirlshardpics.com/
https://www.transgender-hardpics.com/

I have:
Installed LAMP
Configured Virtual Host
Configured DNS on Digitalocean
Installed phpMyAdmin
Created MySQL database and users
Modified the configuration of php.ini
Created Symlink
Open the ports on the firewall
Enabled Mod_rewriter
Enabled Mod_deflate
Install let's encrypt and certificates
Enabled Opcache
Installed and enabled memcached
Installed and enabled cache/Chace_disk
and created some cronjob

And in a couple of weeks it doesn't look bad...

I'm at the point where I would see the 2 sites run for a few days and if all goes well start transferring to this server some other site

But I wonder, how many things will I have forgotten or ignored?

For example, now I have php 5.5.9, maybe it is worth switching to 5.6? (at 7 in ubuntu 16.04 I will pass in the future with another droplet)

I have not installed mod security, but he has always been obnoxious to me, but maybe better to install it?

I was unable to install varnish (it happened a mess), will it be worth losing more time or not?

I'm not sure it works gzip compression, but deflate is installed and configured, do I have to do anything else?
I tried to configure if-modified-since, but I did not understand if it worked...

Will miss something important?
phpinfo()

Barry-xlovecam · 08-08-2017, 05:04 PM

How To Set Up a Firewall with UFW on Ubuntu 16.04
https://www.digitalocean.com/communi...n-ubuntu-16-04
Shields up -- tighten your ship up.
If you have a static ip set that for ssh and mysql remote -- use sftp over port 22

porn-update · 08-09-2017, 09:09 AM

Thank you

Maybe I missed something in the configuration of url_rewriter, because this stupid rule

RewriteRule tags/ tags.php [L]

does not work
https://www.alternativegirlshardpics.com/tags/

It always worked, but on the new server does not want to work...

I tried to rewrite it in 1000 different ways,

RewriteRule ^tags$ tags.php [L]
RewriteRule ^tags\/$ tags.php [L]

But it just doesn't work

I searched in Digitalocean and Google, but I do not find particular configurations of url_rewriter

It is not a basic page, I can directly use tags.php, but I would like to understand why it does not work...

Any ideas?

P.S. of all that could go wrong, if this is the only thing that does not work, I feel more than lucky...

Barry-xlovecam · 08-09-2017, 11:36 AM

using .htaccess in Apache2 right
check
$stat .htaccess

the file permission might need to be user:www-data (user:group) if PHP needs to use that file.

porn-update · 08-09-2017, 12:49 PM

is root...

Code:

root@ubuntu-2gb-blr1-14-04-3:/var/www/html/alternativegirlshardpics.com# stat .htaccess
  File: ?.htaccess?
  Size: 3774      	Blocks: 8          IO Block: 4096   regular file
Device: fd01h/64769d	Inode: 134366      Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2017-08-08 23:58:52.492271000 +0000
Modify: 2017-08-07 23:58:32.766034228 +0000
Change: 2017-08-07 23:58:43.310034228 +0000
 Birth: -

What do I do?

porn-update · 08-11-2017, 10:09 AM

Another stupid question

For cronjob I use: crontab -e

And this line of code
0 16 * * * /usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php

But I'm not sure do something...

They are active for a few days, but I do not receive mail and I see no changes in the site
(the Cronjob upload new content, but may be there are no new content these days)

The scripts have an output that I would like to receive via mail, but I did not understand if I have to set the mail for the cronjob somewhere...

I don't know if they're working....

How can I understand? Are there any logs anywhere? Something missing in my code?

In the different servers sometimes make me add -p, -f etc. But I never understood what they serve... and I have not found guides that explain it...

magneto664 · 08-11-2017, 10:50 AM

Quote:

Originally Posted by porn-update

Another stupid question

For cronjob I use: crontab -e

And this line of code
0 16 * * * /usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php

For first - don't add those codes on public forum - somebody can make a magic with your cronjob and even ddos your server!

for cronjob - don't run cron on root this is a important issue and I strong recommend using some service like "https://www.webcron.org/" where u can get a mail confirmation or stats/logs and you don't need to know magic it skills - basically about a webcron I use since 2009 when I load 10 euros and i have 2 left. Is a fucking cheap and save your time, keep your server clean and safe and easy access via page from mobile, no need to login via ssh to check fix or stop.

tnx

porn-update · 08-11-2017, 12:20 PM

I do not want to use a paid service... I have a Linux server, the server must operate the Cronjob...

magneto664 · 08-11-2017, 04:37 PM

Quote:

Originally Posted by porn-update

I have a Linux server, the server must operate the Cronjob...

PM ! me I will help you!

Barry-xlovecam · 08-11-2017, 04:48 PM

try this

Quote:

*/5 * * * * (cd /usr/share/../../../; php ./file.php) > /dev/null 2>&1

This is a no email 5 min cron
sometimes you have to cd then use the cli
always end you cron with a new line

You need a MTA and Email server to send an email out.
see cd /var/logs

to troubleshoot cron

Code:

root~:$ cat /var/logs/syslog|less

porn-update · 08-12-2017, 09:02 AM

Quote:

You need a MTA and Email server to send an email out.

Should I install postfix? only postfix?
I don't need any more mail, just the ones with the result of the cronjob.

The cronjob logs are weird, I can't figure out if it works.

Code:

Aug 12 06:39:01 ubuntu-2gb-blr1-14-04-3 CRON[11065]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 07:09:01 ubuntu-2gb-blr1-14-04-3 CRON[15998]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 07:15:02 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 07:15:02 Checking for newer version of do-agent
Aug 12 07:15:02 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 07:15:02 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 07:17:01 ubuntu-2gb-blr1-14-04-3 CRON[17326]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 07:39:01 ubuntu-2gb-blr1-14-04-3 CRON[20954]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 08:09:01 ubuntu-2gb-blr1-14-04-3 CRON[25956]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 08:15:02 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 08:15:02 Checking for newer version of do-agent
Aug 12 08:15:02 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 08:15:02 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 08:17:01 ubuntu-2gb-blr1-14-04-3 CRON[27297]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 08:39:01 ubuntu-2gb-blr1-14-04-3 CRON[30895]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 09:09:01 ubuntu-2gb-blr1-14-04-3 CRON[3414]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 09:15:03 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 09:15:03 Checking for newer version of do-agent
Aug 12 09:15:03 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 09:15:03 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 09:17:01 ubuntu-2gb-blr1-14-04-3 CRON[4743]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 09:39:01 ubuntu-2gb-blr1-14-04-3 CRON[8336]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 10:09:01 ubuntu-2gb-blr1-14-04-3 CRON[13268]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 10:16:03 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 10:16:03 Checking for newer version of do-agent
Aug 12 10:16:04 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 10:16:04 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 10:17:01 ubuntu-2gb-blr1-14-04-3 CRON[14593]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 10:39:01 ubuntu-2gb-blr1-14-04-3 CRON[18355]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 11:09:01 ubuntu-2gb-blr1-14-04-3 CRON[23435]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 11:17:01 ubuntu-2gb-blr1-14-04-3 CRON[25007]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 11:17:04 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 11:17:04 Checking for newer version of do-agent
Aug 12 11:17:04 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 11:17:04 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 11:39:01 ubuntu-2gb-blr1-14-04-3 CRON[29374]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 12:00:01 ubuntu-2gb-blr1-14-04-3 CRON[714]: (root) CMD (test -x /usr/bin/certbot -a \! -d /run/systemd/system && perl -e 'sleep int(rand(3600))' && certbot -q renew)
Aug 12 12:09:01 ubuntu-2gb-blr1-14-04-3 CRON[2335]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 12:17:01 ubuntu-2gb-blr1-14-04-3 CRON[3698]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 12:17:12 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 12:17:12 Checking for newer version of do-agent
Aug 12 12:17:12 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 12:17:12 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 12:39:01 ubuntu-2gb-blr1-14-04-3 CRON[7591]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 13:09:01 ubuntu-2gb-blr1-14-04-3 CRON[13202]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 13:17:01 ubuntu-2gb-blr1-14-04-3 CRON[14688]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 13:17:15 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 13:17:15 Checking for newer version of do-agent
Aug 12 13:17:15 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 13:17:15 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 13:39:01 ubuntu-2gb-blr1-14-04-3 CRON[18582]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 14:09:01 ubuntu-2gb-blr1-14-04-3 CRON[23907]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 14:17:01 ubuntu-2gb-blr1-14-04-3 CRON[25285]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 14:17:18 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 14:17:18 Checking for newer version of do-agent
Aug 12 14:17:18 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 14:17:18 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 14:39:01 ubuntu-2gb-blr1-14-04-3 CRON[29030]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 15:09:01 ubuntu-2gb-blr1-14-04-3 CRON[1700]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 15:17:01 ubuntu-2gb-blr1-14-04-3 CRON[3066]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 12 15:17:18 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 15:17:18 Checking for newer version of do-agent
Aug 12 15:17:18 ubuntu-2gb-blr1-14-04-3 do-agent[1007]: 2017/08/12 15:17:18 Unable to update do-agent: Update: Error initializing repository: tuf: failed to decode root.json: expired at 2017-07-22 15:27:54 +0000 UTC
Aug 12 15:39:01 ubuntu-2gb-blr1-14-04-3 CRON[6929]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 12 15:46:15 ubuntu-2gb-blr1-14-04-3 crontab[8299]: (root) LIST (root)
Aug 12 15:47:50 ubuntu-2gb-blr1-14-04-3 crontab[8634]: (root) BEGIN EDIT (root)
Aug 12 15:48:26 ubuntu-2gb-blr1-14-04-3 crontab[8634]: (root) REPLACE (root)
Aug 12 15:48:26 ubuntu-2gb-blr1-14-04-3 crontab[8634]: (root) END EDIT (root)
Aug 12 15:49:01 ubuntu-2gb-blr1-14-04-3 cron[1058]: (root) RELOAD (crontabs/root)
(END)

I currently have only two crons a day, at 4pm and 5pm, and I renew let's encrypt at 3.15

I have search the error in Google, but the answers are all very confusing...

magneto664 · 08-12-2017, 09:06 AM

Quote:

Originally Posted by porn-update

Should I install postfix? only postfix?

never install on your server postfix or any mail service. ! or you want to give access for spammerS?

Barry-xlovecam · 08-12-2017, 08:29 PM

Did you edit the conrab to a
(cd /path/; php file.php)

try it manually does the cron work manually?

maybe without the \. that is from an old php 5 install? or just

php /path/file.php

su 'user'
password ********

crontab -e

make a user crontab for this

then verify $ stat [] that any file to be written to is permissions user:www-data otherwise the php will not be able to write to the file
you could go up from 644 to 666 and try it also

If it is a PDO MySQL make sure you settings are correct for the database

make sure there is a \n (newline) at the end of the command

leave the > /dev/null 2>&1 off for now

I don't see it working
Is there some file affected -- can you stat a date time?

Mail servers are a hassle to set up correctly -- why do you really need an email -- to feel good? Can't you tell by the website's updates if the cronjob is working?

Kafka · 08-13-2017, 04:01 PM

Varnish doesn't work (yet) with Apache https. You have to use Nginx to handle incoming SSL requests:

nginx (https, 443) -> varnish (http, 80) -> apache (http, 8080)

See here for more details.

For just sending mails you can use mailx (a Unix utility program for sending and receiving mail,) command, no locale MTA is required (like Postfix) and use the Gmail MTA.

If you don't have the mailx command, you can install the package.
You can use this command to send emails:

echo -e "your body text" | mailx -v -s "subject text" \
-S smtp-use-starttls \
-S ssl-verify=ignore \
-S smtp-auth=login \
-S smtp=smtp://smtp.gmail.com:587 \
-S from="[email protected]" \
-S [email protected] \
-S smtp-auth-password=yourGmailpasswd \
-S ssl-verify=ignore recipientemailaddress

copy this command to a file (shell script) and make it executable.
With cron it is easy to execute this script to run periodically at fixed times.

and never, ever use ftp. Use sftp(secure ftp)or rsync to transfer data to your server.
Ftp is unsecure and all the data is unencrypted.

Learn shell commands and to test things and learn things install Ubuntu or Centos.
on your local pc.
Copy (with rsync) all the data to your local pc (open port 22 for local ssh server) so you can test things.

porn-update · 08-14-2017, 09:59 AM

Thanks for the answers.

The Cronjob, manually launched works (and works on other servers)

I added a file https://www.alternativegirlshardpics.com/lastcron.txt the timestamp of the last started. fwrite in cronojob.php.

Now I've added all the possible ways, to figure out if someone works, then if it works I'll see what it is

The mail I really would need, because I load data from RSS, XML, TXT files etc that are not mine and every day there is some new error to correct and fix.

Via Mail I also get the output of PHP errors.

Barry-xlovecam · 08-15-2017, 10:56 AM

no: cd /usr/share//../../ is an example path

the way it works, is the cron will cd to that location ; (<stop next command) php ./(execute this file)
then you need no path to the file

try that manually as the cron would do it
$ cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php
see if it works ok in a bash shell (ssh) and NOT a browser

so

Code:

0 16 * * * (cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php)

try without the ./ if that does not work

porn-update · 08-16-2017, 01:19 PM

I tried everything, done everything,

I also tried to use different users, both root and normal user
Nothing ever works.

But in the logs I found this

Code:

Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1520]: (root) CMD (php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1522]: (pornupdate) CMD (/usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1521]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php cronojob.php))
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1525]: (root) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php))
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1528]: (root) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php cronojob.php))
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1524]: (pornupdate) CMD (php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1531]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php))
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1516]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1518]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1513]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1514]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1515]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1519]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:01 ubuntu-2gb-blr1-14-04-3 CRON[1517]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:10:59 ubuntu-2gb-blr1-14-04-3 kernel: [  103.896095] random: nonblocking pool is initialized
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1718]: (pornupdate) CMD (php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1717]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php cronojob.php))
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1719]: (pornupdate) CMD (/usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1723]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php))
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1715]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1713]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1714]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:11:01 ubuntu-2gb-blr1-14-04-3 CRON[1716]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1897]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php))
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1898]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php cronojob.php))
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1900]: (pornupdate) CMD (php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1899]: (pornupdate) CMD (/usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1893]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1895]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1896]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:12:01 ubuntu-2gb-blr1-14-04-3 CRON[1894]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2148]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php))
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2149]: (pornupdate) CMD ((cd /var/www/html/alternativegirlshardpics.com/; php cronojob.php))
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2150]: (pornupdate) CMD (/usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2153]: (pornupdate) CMD (php /var/www/html/alternativegirlshardpics.com/cronojob.php)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2145]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2144]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2143]: (CRON) info (No MTA installed, discarding output)
Aug 16 20:13:01 ubuntu-2gb-blr1-14-04-3 CRON[2146]: (CRON) info (No MTA installed, discarding output)

I have to install Postfix???
However, the mails of the cronjob I need...

Barry-xlovecam · 08-17-2017, 07:17 AM

https://serverfault.com/questions/13...tput-to-syslog
try these ideas
setting up a 'proper' email server is not just installing postfix. You will need to create a database, install an MTA setup like Dovecot and an email daemon. You will need to shell into mysql to create email accounts in a the database or find a web GUI to do this. Try the idea in that link first.

Try

Code:

$ sudo  apt-get install libxml2-utils

$ xmllint

xmllint

Kafka · 08-17-2017, 10:06 AM

As i said, use mailx and Gmail MTA. Easy for just sending emails.
btw, Postfix does not need MySql and Dovecot. Just use your login account.

If you only want to send out emails Dovecot is not needed either.
Dovecot is an IMAP and POP3 email server (for receiving emails).

But again, you don't need a local MTA .

porn-update · 08-17-2017, 11:08 AM

So for now I have installed postfix and added the MAILTO= parameter in my crontab, and the mails come to me, so I think Cronjob started to work.
And for me it would be enough already., now calmly I see to understand the rest of your indications

The problem I have now is that I do not get the output of the file via mail, but the code of the file... I mean line by line all the PHP code of my file cronjob.php via mail... ???
And the test file https://www.alternativegirlshardpics.com/lastcron.txt still does not exist, I think PHP does not run... but why???

Quote:

But again, you don't need a local MTA .

I think it need locally something like postfix, because the mail I want to send me the server directly when a cronjob is executed, also because, without MTA this damned cronjob does not work...

Barry-xlovecam · 08-17-2017, 12:25 PM

Quote:

Originally Posted by Kafka

As i said, use mailx and Gmail MTA. Easy for just sending emails.
btw, Postfix does not need MySql and Dovecot. Just use your login account.

If you only want to send out emails Dovecot is not needed either.
Dovecot is an IMAP and POP3 email server (for receiving emails).

But again, you don't need a local MTA .

I have virtual accounts set up on my real email servers. Virtual accounts require that.
Complicated set up.

Keep it simple open the file in a browser? put the file in in a web root. or copy it there as part of the cron.

Or, cron a daily scp command on your local computer if you have a LINUX box to use locally.

I don't understand why you have this bad code issue in the cron -- I would fix that problem programatically or find another feed source ...

porn-update · 08-17-2017, 02:02 PM

So... curl works...

But I'm not happy... I want to know why this damned crontab does not run my PHP scripts and I will not be happy until I can find out...

Postfix gave me some problems with the aliases etc, and fills me the logs of rubbish...

Initially the mails started to arrive, then I restarted the server and postfix started to create problems, I took it half an hour to be able to have the mail again...

Maybe it was enough to add the parameter MAILTO on crontab and maybe the mails arrived the same...

Anyway, for now curl and if everything works in a few days start to move here some sites

porn-update · 08-18-2017, 12:44 PM

Is normal all this junk in my syslog?

Code:

Aug 18 06:41:49 ubuntu-2gb-blr1-14-04-3 rsyslogd: [origin software="rsyslogd" swVersion="7.4.4" x-pid="918" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Aug 18 07:07:13 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 07:07:13 Checking for newer version of do-agent
Aug 18 07:07:13 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 07:07:13 No update available
Aug 18 07:09:01 ubuntu-2gb-blr1-14-04-3 CRON[6566]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/l
ib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 07:17:01 ubuntu-2gb-blr1-14-04-3 CRON[7913]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 18 07:39:01 ubuntu-2gb-blr1-14-04-3 CRON[11520]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 08:07:13 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 08:07:13 Checking for newer version of do-agent
Aug 18 08:07:13 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 08:07:13 No update available
Aug 18 08:09:01 ubuntu-2gb-blr1-14-04-3 CRON[16509]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 08:17:01 ubuntu-2gb-blr1-14-04-3 CRON[17838]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 18 08:39:01 ubuntu-2gb-blr1-14-04-3 CRON[21461]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 08:42:55 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[22114]: connect from scan-42.security.ipip.net[139.162.99.243]
Aug 18 08:42:55 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[22114]: lost connection after CONNECT from scan-42.security.ipip.net[139.162.99.243]
Aug 18 08:42:55 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[22114]: disconnect from scan-42.security.ipip.net[139.162.99.243]
Aug 18 08:46:15 ubuntu-2gb-blr1-14-04-3 postfix/anvil[22116]: statistics: max connection rate 1/60s for (smtp:139.162.99.243) at Aug 18 08:42:55
Aug 18 08:46:15 ubuntu-2gb-blr1-14-04-3 postfix/anvil[22116]: statistics: max connection count 1 for (smtp:139.162.99.243) at Aug 18 08:42:55
Aug 18 08:46:15 ubuntu-2gb-blr1-14-04-3 postfix/anvil[22116]: statistics: max cache size 1 at Aug 18 08:42:55
Aug 18 09:07:14 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 09:07:14 Checking for newer version of do-agent
Aug 18 09:07:19 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 09:07:19 No update available
Aug 18 09:09:01 ubuntu-2gb-blr1-14-04-3 CRON[26507]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 09:17:01 ubuntu-2gb-blr1-14-04-3 CRON[27853]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 18 09:39:01 ubuntu-2gb-blr1-14-04-3 CRON[31516]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 10:07:22 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 10:07:22 Checking for newer version of do-agent
Aug 18 10:07:24 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 10:07:24 No update available
Aug 18 10:09:01 ubuntu-2gb-blr1-14-04-3 CRON[4113]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/l
ib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 10:17:01 ubuntu-2gb-blr1-14-04-3 CRON[5497]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 18 10:23:22 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[6541]: connect from 61-216-14-176.HINET-IP.hinet.net[61.216.14.176]
Aug 18 10:23:23 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[6541]: SSL_accept error from 61-216-14-176.HINET-IP.hinet.net[61.216.14.176]: lost connection
Aug 18 10:23:23 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[6541]: lost connection after STARTTLS from 61-216-14-176.HINET-IP.hinet.net[61.216.14.176]
Aug 18 10:23:23 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[6541]: disconnect from 61-216-14-176.HINET-IP.hinet.net[61.216.14.176]
Aug 18 10:26:43 ubuntu-2gb-blr1-14-04-3 postfix/anvil[6543]: statistics: max connection rate 1/60s for (smtp:61.216.14.176) at Aug 18 10:23:22
Aug 18 10:26:43 ubuntu-2gb-blr1-14-04-3 postfix/anvil[6543]: statistics: max connection count 1 for (smtp:61.216.14.176) at Aug 18 10:23:22
Aug 18 10:26:43 ubuntu-2gb-blr1-14-04-3 postfix/anvil[6543]: statistics: max cache size 1 at Aug 18 10:23:22
Aug 18 10:39:01 ubuntu-2gb-blr1-14-04-3 CRON[9133]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/l
ib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 11:07:30 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 11:07:30 Checking for newer version of do-agent
Aug 18 11:07:31 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 11:07:31 No update available
Aug 18 11:09:01 ubuntu-2gb-blr1-14-04-3 CRON[14118]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 11:17:01 ubuntu-2gb-blr1-14-04-3 CRON[15480]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 18 11:39:01 ubuntu-2gb-blr1-14-04-3 CRON[19143]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/
lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 18 12:00:01 ubuntu-2gb-blr1-14-04-3 CRON[22649]: (root) CMD (test -x /usr/bin/certbot -a \! -d /run/systemd/system && perl -e 'sleep int(rand(3600))' && certbot -q r
enew)
Aug 18 12:07:33 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 12:07:33 Checking for newer version of do-agent
Aug 18 12:07:34 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/18 12:07:34 No update available

Other thing, page scan times...

Long ago when the server worked fine 200-250 milliseconds, now with new server 1100-1200 milliseconds (so much), can I do something?

Will it improve in the future? Maybe cache or server that optimizes?

porn-update · 08-21-2017, 01:16 PM

S**t, today I almost thought about starting to move some site... and I found this...

Code:

Cron <root@ubuntu-2gb-blr1-14-04-3> curl https://www.alternativegirlshardpics.com/cronojob.php

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0
curl: (6) Could not resolve host: www.alternativegirlshardpics.com

What is it? What happened? How can I understand what didn't work?

This is syslog... there are always a lot of strange lines... which I'm not sure there should be...

Code:

Aug 21 15:09:01 ubuntu-2gb-blr1-14-04-3 CRON[23886]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/l
ib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 15:17:01 ubuntu-2gb-blr1-14-04-3 CRON[25315]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 21 15:18:33 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[25582]: connect from 64-60-63-243.static-ip.telepacific.net[64.60.63.243]
Aug 21 15:18:34 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[25582]: NOQUEUE: reject: RCPT from 64-60-63-243.static-ip.telepacific.net[64.60.63.243]: 454 4.7.1 <[email protected]>: Relay access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<DelicaTS>
Aug 21 15:18:34 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[25582]: disconnect from 64-60-63-243.static-ip.telepacific.net[64.60.63.243]
Aug 21 15:21:22 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 15:21:22 Checking for newer version of do-agent
Aug 21 15:21:23 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 15:21:23 No repository update available
Aug 21 15:21:54 ubuntu-2gb-blr1-14-04-3 postfix/anvil[25584]: statistics: max connection rate 1/60s for (smtp:64.60.63.243) at Aug 21 15:18:33
Aug 21 15:21:54 ubuntu-2gb-blr1-14-04-3 postfix/anvil[25584]: statistics: max connection count 1 for (smtp:64.60.63.243) at Aug 21 15:18:33
Aug 21 15:21:54 ubuntu-2gb-blr1-14-04-3 postfix/anvil[25584]: statistics: max cache size 1 at Aug 21 15:18:33
Aug 21 15:39:01 ubuntu-2gb-blr1-14-04-3 CRON[29072]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 16:00:01 ubuntu-2gb-blr1-14-04-3 CRON[32620]: (root) CMD (curl https://www.alternativegirlshardpics.com/cronojob.php)
Aug 21 16:00:04 ubuntu-2gb-blr1-14-04-3 postfix/pickup[22785]: C72CA40911: uid=0 from=<root>
Aug 21 16:00:04 ubuntu-2gb-blr1-14-04-3 postfix/cleanup[32635]: C72CA40911: message-id=<[email protected]>
Aug 21 16:00:04 ubuntu-2gb-blr1-14-04-3 postfix/qmgr[1296]: C72CA40911: from=<[email protected]>, size=1191, nrcpt=1 (queue active)
Aug 21 16:00:15 ubuntu-2gb-blr1-14-04-3 postfix/smtp[32637]: C72CA40911: to=<[email protected]>, relay=porn-update.com[198.252.98.30]:25, delay=11, delays=0.02/0.01/3.3/7.7, dsn=2.0.0, status=sent (250 OK id=1djp7X-004Gzv-H1)
Aug 21 16:00:15 ubuntu-2gb-blr1-14-04-3 postfix/qmgr[1296]: C72CA40911: removed
Aug 21 16:09:01 ubuntu-2gb-blr1-14-04-3 CRON[1714]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 16:17:01 ubuntu-2gb-blr1-14-04-3 CRON[3047]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 21 16:21:27 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 16:21:27 Checking for newer version of do-agent
Aug 21 16:21:27 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 16:21:27 No repository update available
Aug 21 16:39:02 ubuntu-2gb-blr1-14-04-3 CRON[6737]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 17:00:01 ubuntu-2gb-blr1-14-04-3 CRON[10247]: (root) CMD (curl https://www.transgender-hardpics.com/cronojob.php)
Aug 21 17:01:01 ubuntu-2gb-blr1-14-04-3 postfix/pickup[7186]: 4B8A740911: uid=0 from=<root>
Aug 21 17:01:01 ubuntu-2gb-blr1-14-04-3 postfix/cleanup[10423]: 4B8A740911: message-id=<[email protected]>
Aug 21 17:01:01 ubuntu-2gb-blr1-14-04-3 postfix/qmgr[1296]: 4B8A740911: from=<[email protected]>, size=6050, nrcpt=1 (queue active)
Aug 21 17:01:17 ubuntu-2gb-blr1-14-04-3 postfix/smtp[10425]: 4B8A740911: to=<[email protected]>, relay=porn-update.com[198.252.98.30]:25, delay=16, delays=0.01/0/5.9/9.9, dsn=2.0.0, status=sent (250 OK id=1djq4Y-000c2M-FJ)
Aug 21 17:01:17 ubuntu-2gb-blr1-14-04-3 postfix/qmgr[1296]: 4B8A740911: removed
Aug 21 17:09:01 ubuntu-2gb-blr1-14-04-3 CRON[11761]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 17:17:01 ubuntu-2gb-blr1-14-04-3 CRON[13099]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 21 17:21:28 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 17:21:28 Checking for newer version of do-agent
Aug 21 17:21:28 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 17:21:28 No repository update available
Aug 21 17:39:01 ubuntu-2gb-blr1-14-04-3 CRON[16756]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 17:51:04 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[18771]: connect from 50-242-205-53-static.hfc.comcastbusiness.net[50.242.205.53]
Aug 21 17:51:05 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[18771]: NOQUEUE: reject: RCPT from 50-242-205-53-static.hfc.comcastbusiness.net[50.242.205.53]: 454 4.7.1 <[email protected]>: Relay access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<AAMFG-DC-TS-01>
Aug 21 17:51:05 ubuntu-2gb-blr1-14-04-3 postfix/smtpd[18771]: disconnect from 50-242-205-53-static.hfc.comcastbusiness.net[50.242.205.53]
Aug 21 17:54:25 ubuntu-2gb-blr1-14-04-3 postfix/anvil[18773]: statistics: max connection rate 1/60s for (smtp:50.242.205.53) at Aug 21 17:51:04
Aug 21 17:54:25 ubuntu-2gb-blr1-14-04-3 postfix/anvil[18773]: statistics: max connection count 1 for (smtp:50.242.205.53) at Aug 21 17:51:04
Aug 21 17:54:25 ubuntu-2gb-blr1-14-04-3 postfix/anvil[18773]: statistics: max cache size 1 at Aug 21 17:51:04
Aug 21 18:09:01 ubuntu-2gb-blr1-14-04-3 CRON[21816]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 18:17:01 ubuntu-2gb-blr1-14-04-3 CRON[23163]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 21 18:21:32 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 18:21:32 Checking for newer version of do-agent
Aug 21 18:21:32 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 18:21:32 No repository update available
Aug 21 18:39:01 ubuntu-2gb-blr1-14-04-3 CRON[26840]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 19:09:01 ubuntu-2gb-blr1-14-04-3 CRON[31868]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Aug 21 19:17:01 ubuntu-2gb-blr1-14-04-3 CRON[754]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Aug 21 19:21:33 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 19:21:33 Checking for newer version of do-agent
Aug 21 19:21:34 ubuntu-2gb-blr1-14-04-3 do-agent[1031]: 2017/08/21 19:21:34 No repository update available
Aug 21 19:39:01 ubuntu-2gb-blr1-14-04-3 CRON[4498]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))

Barry-xlovecam · 08-21-2017, 07:03 PM

Code:

curl "https://www.alternativegirlshardpics.com/cronojob.php"

try in quotes "_____"

'____' works in a bash terminal (or ssh) ONLY

porn-update · 08-22-2017, 01:05 PM

Today it works, only yesterday did that thing... I would like to understand why before starting to move sites with many more visits

All that junk in the syslogs is normal? Or something or someone is killing me the server?

I don't need cron hourly, can I take it off?

porn-update · 08-22-2017, 02:20 PM

Another thing, I was thinking about varnish...

Not all my sites are HTTPS, can I install varnish?

Only for HTTP, even if it does not do HTTPS maybe does something

But can varnish and HTTPS coexist?

Varnish only works on port 80 or if installed can create problems with the 443 of HTTPS?

porn-update · 08-26-2017, 03:12 PM

How should I read this?

Am I already at the limit? Or do I have many other unused resources? I have too much cache?

It is strange this graph, free is very small, but also used is very small, cached is a lot, buffered seems growing but free and used do not seem to shrink... I'm kinda confused???

Can someone help me understand?

King Mark · 08-26-2017, 03:34 PM

You doing too much bro

topadult · 08-26-2017, 05:27 PM

I suggest you use https://runcloud.io/ ;)

porn-update · 08-28-2017, 03:08 PM

Quote:

Originally Posted by Dead Eye

You doing too much bro

What you mean?

magneto664 · 08-28-2017, 03:56 PM

Quote:

Originally Posted by porn-update

How should I read this?
[IMG]

It is strange this graph, free is very small, but also used is very small, cached is a lot,

and what is wrong with this? cache is a cache don't look on it.

porn-update · 08-28-2017, 04:56 PM

Ok, but for now I have moved only 2 of my sites, on this server I would like to put about 6 other sites very similar, as structure and visits, can I continue to add sites?

Barry-xlovecam · 08-28-2017, 08:44 PM

memory usage
$ free -m

I have 12G RAM on this box

Code:

barry@paragon-DS-7:~$ free -m
              total        used        free      shared  buff/cache   available
Mem:          12015        3467        4422         161        4124        8020
Swap:          4093           0        4093

That takes a few milliseconds to run in ssh

Or. you can run this -- repeats the command every 15 seconds and dates and logs the results.

Code:

$ while sleep 15; do   date >>my.log;  free -m >> my.log; done

Code:

$ cat my.log

will print the data to your screen.

or learn how to use the top command and sort your processes.

in ssh/terminal

Code:

$ man top

'q' to exit the manual [quits]

In the host's dashboard there are usage graphs.

magneto664 · 08-29-2017, 08:16 AM

Quote:

Originally Posted by Barry-xlovecam

memory usage
$ free -m

I have 12G RAM on this box

It hosts pages that have more viewers than yours on vps with 1 gb of ram
I see that you like to give away money, will you give me a little?
tnx

Barry-xlovecam · 08-29-2017, 05:10 PM

That's just one LINUX box on my office desk -- that is running Xorg ltdm GUI. It's a single processor 4core workstation -- not a server.

magneto664 · 08-29-2017, 06:35 PM

Quote:

Originally Posted by Barry-xlovecam

It's a single processor 4core workstation -- not a server.

So sorry but what you think? Server don't have a processors? or have a maybe different magic processors? this is same computer like any other.

OMG !!!

Barry-xlovecam · 08-29-2017, 08:58 PM

fuck you

magneto664 · 08-30-2017, 03:06 AM

Quote:

Originally Posted by Barry-xlovecam

fuck you

Buahhahahaha !!!

Barry-xlovecam · 08-30-2017, 09:57 AM

Please-- put me on ignore -- asswipe

porn-update · 08-30-2017, 04:10 PM

Is it possible to block or throw out Magneto664 from the discussion?

It's a nice discussion, I'm very sorry that the focus on the main topic is lost because of an idiot

Barry-xlovecam · 08-30-2017, 06:12 PM

Don't worry about it ...
GFY is full of little attention whores.
That is what the main forum is for to hand someone their ass in a hat.

magneto664 · 08-30-2017, 06:50 PM

Quote:

Originally Posted by porn-update

Is it possible to block or throw out Magneto664 from the discussion?

No worry i already ignore two knobs with ZERO idea about server, hosting and computer skills
pray to Jesus or whatever you do. I hope nobody will hack your amazing servers - you give almost everything in plain text

wait....... sorty I hope somebody hack your servers. you give almost everything in plain text :

bye.. and sweet kisses

porn-update · 09-05-2017, 05:45 PM

Umh...

Today's day of Cronjob... I make a cronjob for each site, at a distance of one hour from the other once a week.

Cronjob upload new content to MySQL, add new links to Sitemaps etc. Some cronjob last a few seconds 5-10-20 others are sometimes longer 2-3 min.

Today I began to see strange behaviors.
For example trying to install zip

Code:

root@ubuntu-2gb-blr1-14-04-3:~# sudo apt-get install zip
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages will be upgraded:
  zip
1 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
1 not fully installed or removed.
Need to get 0 B/262 kB of archives.
After this operation, 603 kB of additional disk space will be used.
(Reading database ... 64067 files and directories currently installed.)
Preparing to unpack .../archives/zip_3.0-8_amd64.deb ...
Unpacking zip (3.0-8) over (3.0-8) ...
dpkg: error processing archive /var/cache/apt/archives/zip_3.0-8_amd64.deb (--unpack):
 unable to create `/usr/bin/zip.dpkg-new' (while processing `./usr/bin/zip'): No space left on device
No apport report written because the error message indicates a disk full error
                                                                              dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Errors were encountered while processing:
 /var/cache/apt/archives/zip_3.0-8_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

or occasionally visiting a site

Updating the page all back to work

Even nixstat from a few days, it's kinda hard to show me the charts.

I have added some site in the past few days, even from 2-3000 visits a day and are not all yet... the two most performing sites I would like to put on this server I have not moved them yet.

Are problems that can be solved with some optimization of MySQL (eg resizing tmp or caches) or is it already time to buy a larger server?

Barry-xlovecam · 09-05-2017, 06:22 PM

There is a problem writing to the disk.

$ df
and check the disc usage.

here is an example of a new vps

Code:

root@ds12-ams-2gb:~# df
Filesystem     1K-blocks    Used Available Use% Mounted on
udev             1014796       0   1014796   0% /dev
tmpfs             204820   16044    188776   8% /run
/dev/vda1       40593708 3052664  37524660   8% /
tmpfs            1024092       0   1024092   0% /dev/shm
tmpfs               5120       0      5120   0% /run/lock
tmpfs            1024092       0   1024092   0% /sys/fs/cgroup
tmpfs             204820       0    204820   0% /run/user/1001
tmpfs             204820       0    204820   0% /run/user/0

Have you been caching images and used up your disc allocation? If no you have some permission error but apt runs as root ...

porn-update · 09-05-2017, 06:53 PM

When login

Code:

  System information as of Wed Sep  6 01:25:04 UTC 2017

  System load:  0.75               Processes:           116
  Usage of /:   36.5% of 39.34GB   Users logged in:     0
  Memory usage: 21%                IP address for eth0: 139.59.71.64
  Swap usage:   0%

Code:

root@ubuntu-2gb-blr1-14-04-3:~# df
Filesystem     1K-blocks     Used Available Use% Mounted on
udev             1019956       12   1019944   1% /dev
tmpfs             204988      376    204612   1% /run
/dev/vda1       41251136 15058276  24484420  39% /
none                   4        0         4   0% /sys/fs/cgroup
none                5120        0      5120   0% /run/lock
none             1024936        0   1024936   0% /run/shm
none              102400        0    102400   0% /run/user
root@ubuntu-2gb-blr1-14-04-3:~#

My sites have practically only external images.

I have however MySQL tables with hundreds of thousands of lines.

I also use this type of query for the research:

Code:

$query_photo = "SELECT SQL_CALC_FOUND_ROWS ".$select_fields.", MATCH(title, description) AGAINST('".trim(addslashes($_GET['query']))."') as score FROM ".$prefix."photo WHERE MATCH(title, description) AGAINST('".trim(addslashes($_GET['query']))."') ".$sort_by." DESC LIMIT ".$start.", ".$step."";

Everyone says better search, more precise, etc. etc., but this type of query forces you to create indexes in databases with hundreds of thousands of rows... maybe they can cause excessive consumption of MySQL, CPU, disk, etc?

I also use APCU, memcached and Opcache, can they create the problem?

I did zip even with sudo, same result

Code:

root@ubuntu-2gb-blr1-14-04-3:~# sudo apt-get install zip
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages will be upgraded:
  zip
1 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
1 not fully installed or removed.
Need to get 0 B/262 kB of archives.
After this operation, 603 kB of additional disk space will be used.
(Reading database ... 64067 files and directories currently installed.)
Preparing to unpack .../archives/zip_3.0-8_amd64.deb ...
Unpacking zip (3.0-8) over (3.0-8) ...
dpkg: error processing archive /var/cache/apt/archives/zip_3.0-8_amd64.deb (--unpack):
 unable to create `/usr/bin/zip.dpkg-new' (while processing `./usr/bin/zip'): No space left on device
No apport report written because the error message indicates a disk full error
                                                                              dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Errors were encountered while processing:
 /var/cache/apt/archives/zip_3.0-8_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@ubuntu-2gb-blr1-14-04-3:~#

Today is the first day that I see these errors, until yesterday the sites worked properly and the server has always installed without problems

porn-update · 09-06-2017, 05:35 PM

Today also came this:

Code:

An unexpected error occurred:
IOError: [Errno 28] No space left on device: '/var/log/letsencrypt/letsencrypt.log'
Please see the logfile '/tmp/tmp58sSmQ' for more details.

But I have no clear of what space we are talking about... The disc is used at 38%, can not use the free space in some way???

It is RAM?

porn-update · 09-06-2017, 07:18 PM

I also found this

Code:

root@ubuntu-2gb-blr1-14-04-3:~#  sudo df -i 
Filesystem      Inodes   IUsed  IFree IUse% Mounted on
udev            254989     392 254597    1% /dev
tmpfs           256234     316 255918    1% /run
/dev/vda1      2621440 2621440      0  100% /
none            256234       2 256232    1% /sys/fs/cgroup
none            256234       5 256229    1% /run/lock
none            256234       1 256233    1% /run/shm
none            256234       2 256232    1% /run/user
root@ubuntu-2gb-blr1-14-04-3:~#

Here I have a 100%, but I do not know what it is... or what to do...

08-15-2017, 10:56 AM	#68
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	no: cd /usr/share//../../ is an example path the way it works, is the cron will cd to that location ; (<stop next command) php ./(execute this file) then you need no path to the file try that manually as the cron would do it $ cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php see if it works ok in a bash shell (ssh) and NOT a browser so Code: 0 16 * * * (cd /var/www/html/alternativegirlshardpics.com/; php ./cronojob.php) try without the ./ if that does not work

08-17-2017, 07:17 AM	#70
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	https://serverfault.com/questions/13...tput-to-syslog try these ideas setting up a 'proper' email server is not just installing postfix. You will need to create a database, install an MTA setup like Dovecot and an email daemon. You will need to shell into mysql to create email accounts in a the database or find a web GUI to do this. Try the idea in that link first. Try Code: $ sudo apt-get install libxml2-utils $ xmllint xmllint

08-21-2017, 07:03 PM	#77
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Code: curl "https://www.alternativegirlshardpics.com/cronojob.php" try in quotes "_____" '____' works in a bash terminal (or ssh) ONLY

08-26-2017, 03:34 PM	#81
King Mark Masterbaiter Industry Role: Join Date: Aug 2016 Posts: 27,028	You doing too much bro __________________ Unlock the limitless potential of AI

08-26-2017, 05:27 PM	#82
topadult Confirmed User Industry Role: Join Date: Jun 2015 Posts: 507	I suggest you use https://runcloud.io/ ;) __________________ Looking for adult SEO service that works? Click here for more infos ;) Email: pro.topadult at gmail dot com Skype: protopadult ICQ: 690852277 (rarely use)

08-08-2017, 08:51 AM	#51
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Honestly to me the https make just crap, I find them an extremely stupid thing, especially on sites like these, but slowly everyone is getting scared by big G. At the logical level on many occasions have no meaning, eg in cases like mine where the site is HTTPS but the contents are not. I think it's just an advantage for big G that certainly somehow manages to simplify or reduce the weight of the pages that he has to read. The fact that they should be used only in login procedures or containing sensitive data has been completely suppressed by the fear of not complying with the rule of big G, so many sites apply them on all pages. At the moment they almost seem to be the main factor even just to be taken into account by big G, also I do not think it is absolutely true. With regard to end users I believe that 99% have absolutely no idea what the HTTPS protocol is, nor do they care about it. My sites would not absolutely need it, I'm installing them only in some, just not to be the only idiot not to have them, but I would gladly do it less.

08-08-2017, 08:59 AM	#52
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Another stupid question... Cloudflare needs something on the server to work? I use it only in a bigboobshardpics.com site and only in the Cdn folder, where all the images of the site are located. The site itself does not need cloudflare, slows down if I apply it to the whole site. The idea is to create a kind of CDN leveraging CloudFlare, just for images. Does it make sense to you? Need something on the server for CloudFlare?

08-08-2017, 02:05 PM	#53
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	And so, I've seen everything, tried everything, done everything... The 2 sites are online: https://www.alternativegirlshardpics.com/ https://www.transgender-hardpics.com/ I have: Installed LAMP Configured Virtual Host Configured DNS on Digitalocean Installed phpMyAdmin Created MySQL database and users Modified the configuration of php.ini Created Symlink Open the ports on the firewall Enabled Mod_rewriter Enabled Mod_deflate Install let's encrypt and certificates Enabled Opcache Installed and enabled memcached Installed and enabled cache/Chace_disk and created some cronjob And in a couple of weeks it doesn't look bad... I'm at the point where I would see the 2 sites run for a few days and if all goes well start transferring to this server some other site But I wonder, how many things will I have forgotten or ignored? For example, now I have php 5.5.9, maybe it is worth switching to 5.6? (at 7 in ubuntu 16.04 I will pass in the future with another droplet) I have not installed mod security, but he has always been obnoxious to me, but maybe better to install it? I was unable to install varnish (it happened a mess), will it be worth losing more time or not? I'm not sure it works gzip compression, but deflate is installed and configured, do I have to do anything else? I tried to configure if-modified-since, but I did not understand if it worked... Will miss something important? phpinfo()

08-08-2017, 05:04 PM	#54
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	How To Set Up a Firewall with UFW on Ubuntu 16.04 https://www.digitalocean.com/communi...n-ubuntu-16-04 Shields up -- tighten your ship up. If you have a static ip set that for ssh and mysql remote -- use sftp over port 22

08-09-2017, 09:09 AM	#55
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Thank you Maybe I missed something in the configuration of url_rewriter, because this stupid rule RewriteRule tags/ tags.php [L] does not work https://www.alternativegirlshardpics.com/tags/ It always worked, but on the new server does not want to work... I tried to rewrite it in 1000 different ways, RewriteRule ^tags$ tags.php [L] RewriteRule ^tags\/$ tags.php [L] But it just doesn't work I searched in Digitalocean and Google, but I do not find particular configurations of url_rewriter It is not a basic page, I can directly use tags.php, but I would like to understand why it does not work... Any ideas? P.S. of all that could go wrong, if this is the only thing that does not work, I feel more than lucky...

08-09-2017, 11:36 AM	#56
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	using .htaccess in Apache2 right check $stat .htaccess the file permission might need to be user:www-data (user:group) if PHP needs to use that file.

08-11-2017, 10:09 AM	#58
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Another stupid question For cronjob I use: crontab -e And this line of code 0 16 * * * /usr/bin/php /var/www/html/alternativegirlshardpics.com/cronojob.php But I'm not sure do something... They are active for a few days, but I do not receive mail and I see no changes in the site (the Cronjob upload new content, but may be there are no new content these days) The scripts have an output that I would like to receive via mail, but I did not understand if I have to set the mail for the cronjob somewhere... I don't know if they're working.... How can I understand? Are there any logs anywhere? Something missing in my code? In the different servers sometimes make me add -p, -f etc. But I never understood what they serve... and I have not found guides that explain it...

08-11-2017, 12:20 PM	#60
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	I do not want to use a paid service... I have a Linux server, the server must operate the Cronjob...

08-12-2017, 08:29 PM	#65
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Did you edit the conrab to a (cd /path/; php file.php) try it manually does the cron work manually? maybe without the \. that is from an old php 5 install? or just php /path/file.php su 'user' password ******** crontab -e make a user crontab for this then verify $ stat [] that any file to be written to is permissions user:www-data otherwise the php will not be able to write to the file you could go up from 644 to 666 and try it also If it is a PDO MySQL make sure you settings are correct for the database make sure there is a \n (newline) at the end of the command leave the > /dev/null 2>&1 off for now I don't see it working Is there some file affected -- can you stat a date time? Mail servers are a hassle to set up correctly -- why do you really need an email -- to feel good? Can't you tell by the website's updates if the cronjob is working?

08-13-2017, 04:01 PM	#66
Kafka Confirmed User Join Date: Oct 2002 Location: Holland Posts: 466	Varnish doesn't work (yet) with Apache https. You have to use Nginx to handle incoming SSL requests: nginx (https, 443) -> varnish (http, 80) -> apache (http, 8080) See here for more details. For just sending mails you can use mailx (a Unix utility program for sending and receiving mail,) command, no locale MTA is required (like Postfix) and use the Gmail MTA. If you don't have the mailx command, you can install the package. You can use this command to send emails: echo -e "your body text" \| mailx -v -s "subject text" \ -S smtp-use-starttls \ -S ssl-verify=ignore \ -S smtp-auth=login \ -S smtp=smtp://smtp.gmail.com:587 \ -S from="[email protected]" \ -S [email protected] \ -S smtp-auth-password=yourGmailpasswd \ -S ssl-verify=ignore recipientemailaddress copy this command to a file (shell script) and make it executable. With cron it is easy to execute this script to run periodically at fixed times. and never, ever use ftp. Use sftp(secure ftp)or rsync to transfer data to your server. Ftp is unsecure and all the data is unencrypted. Learn shell commands and to test things and learn things install Ubuntu or Centos. on your local pc. Copy (with rsync) all the data to your local pc (open port 22 for local ssh server) so you can test things.

08-14-2017, 09:59 AM	#67
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Thanks for the answers. The Cronjob, manually launched works (and works on other servers) I added a file https://www.alternativegirlshardpics.com/lastcron.txt the timestamp of the last started. fwrite in cronojob.php. Now I've added all the possible ways, to figure out if someone works, then if it works I'll see what it is The mail I really would need, because I load data from RSS, XML, TXT files etc that are not mine and every day there is some new error to correct and fix. Via Mail I also get the output of PHP errors.

08-17-2017, 10:06 AM	#71
Kafka Confirmed User Join Date: Oct 2002 Location: Holland Posts: 466	As i said, use mailx and Gmail MTA. Easy for just sending emails. btw, Postfix does not need MySql and Dovecot. Just use your login account. If you only want to send out emails Dovecot is not needed either. Dovecot is an IMAP and POP3 email server (for receiving emails). But again, you don't need a local MTA .

08-17-2017, 02:02 PM	#74
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	So... curl works... But I'm not happy... I want to know why this damned crontab does not run my PHP scripts and I will not be happy until I can find out... Postfix gave me some problems with the aliases etc, and fills me the logs of rubbish... Initially the mails started to arrive, then I restarted the server and postfix started to create problems, I took it half an hour to be able to have the mail again... Maybe it was enough to add the parameter MAILTO on crontab and maybe the mails arrived the same... Anyway, for now curl and if everything works in a few days start to move here some sites

08-22-2017, 01:05 PM	#78
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Today it works, only yesterday did that thing... I would like to understand why before starting to move sites with many more visits All that junk in the syslogs is normal? Or something or someone is killing me the server? I don't need cron hourly, can I take it off?

08-22-2017, 02:20 PM	#79
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Another thing, I was thinking about varnish... Not all my sites are HTTPS, can I install varnish? Only for HTTP, even if it does not do HTTPS maybe does something But can varnish and HTTPS coexist? Varnish only works on port 80 or if installed can create problems with the 443 of HTTPS?

08-26-2017, 03:12 PM	#80
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	How should I read this? Am I already at the limit? Or do I have many other unused resources? I have too much cache? It is strange this graph, free is very small, but also used is very small, cached is a lot, buffered seems growing but free and used do not seem to shrink... I'm kinda confused??? Can someone help me understand?

08-28-2017, 04:56 PM	#85
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Ok, but for now I have moved only 2 of my sites, on this server I would like to put about 6 other sites very similar, as structure and visits, can I continue to add sites?

08-28-2017, 08:44 PM	#86
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	memory usage $ free -m I have 12G RAM on this box Code: barry@paragon-DS-7:~$ free -m total used free shared buff/cache available Mem: 12015 3467 4422 161 4124 8020 Swap: 4093 0 4093 That takes a few milliseconds to run in ssh Or. you can run this -- repeats the command every 15 seconds and dates and logs the results. Code: $ while sleep 15; do date >>my.log; free -m >> my.log; done Code: $ cat my.log will print the data to your screen. or learn how to use the top command and sort your processes. in ssh/terminal Code: $ man top 'q' to exit the manual [quits] In the host's dashboard there are usage graphs.

08-29-2017, 05:10 PM	#88
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	That's just one LINUX box on my office desk -- that is running Xorg ltdm GUI. It's a single processor 4core workstation -- not a server.

08-29-2017, 08:58 PM	#90
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	fuck you

08-30-2017, 09:57 AM	#92
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Please-- put me on ignore -- asswipe

08-30-2017, 04:10 PM	#93
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Is it possible to block or throw out Magneto664 from the discussion? It's a nice discussion, I'm very sorry that the focus on the main topic is lost because of an idiot

08-30-2017, 06:12 PM	#94
Barry-xlovecam It's 42 Industry Role: Join Date: Jun 2010 Location: Global Posts: 18,083	Don't worry about it ... GFY is full of little attention whores. That is what the main forum is for to hand someone their ass in a hat.

09-06-2017, 05:35 PM	#99
porn-update Confirmed User Industry Role: Join Date: Apr 2014 Posts: 386	Today also came this: Code: An unexpected error occurred: IOError: [Errno 28] No space left on device: '/var/log/letsencrypt/letsencrypt.log' Please see the logfile '/tmp/tmp58sSmQ' for more details. But I have no clear of what space we are talking about... The disc is used at 38%, can not use the free space in some way??? It is RAM?